iMac Localisation volume de démarrage sur Imac

Victoire ! -->
Bloc de code:
/dev/disk2 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +2.3 TB     disk2
                                 Physical Stores disk0s2, disk1s2
   1:                APFS Volume Macintosh HD            162.4 GB   disk2s1
   2:                APFS Volume Preboot                 42.2 MB    disk2s2
   3:                APFS Volume Recovery                519.2 MB   disk2s3

  • CCC a bien été feinté par la partition de secours créée à la main et l'a prise pour argent comptant. Il a donc créé les 2 volumes auxiliaires qui permettent à Macintosh HD d'être un volume de démarrage apfs valide
  • je vois aux 162 Go dans le volume que tu as pas mal délesté

Redémarre > la touche "alt" tenue pressée > choisis Macintosh HD > démarre dessus -->

- tu n'as qu'à dire si tu récupères une session conforme à la précédente (mais allégée en données)...​
 
C'est bon, j'ai la cession, ouverte sur Macintosh HD!

Bloc de code:
diskutil list
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                 Apple_APFS Container disk2         2.2 TB     disk0s2
   3:                  Apple_HFS Clone                   770.0 GB   disk0s3
   4:                 Apple_Boot Recovery HD             650.0 MB   disk0s4

/dev/disk1 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                 Apple_APFS Container disk2         121.1 GB   disk1s2

/dev/disk2 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +2.3 TB     disk2
                                 Physical Stores disk1s2, disk0s2
   1:                APFS Volume Macintosh HD            163.3 GB   disk2s1
   2:                APFS Volume Preboot                 45.3 MB    disk2s2
   3:                APFS Volume Recovery                519.2 MB   disk2s3
   4:                APFS Volume VM                      2.1 GB     disk2s4
 
Dernière édition par un modérateur:
Alors passe la commande (copier-la bien jusqu'au list final) :
Bloc de code:
diskutil umount force disk0s3 ; diskutil eraseVolume free null disk0s3 ; diskutil eraseVolume free null disk0s4 ; diskutil ap resizeContainer disk2 0b ; diskutil list

  • cette commande : a) démonte de force le volume Clone ; b) supprime la partition de Clone > c) supprime la partition Recovery HD > d) récupère leur espace au Conteneur apfs et spécifiquement à la partition disk0s2 du HDD > e) réaffiche le tableau des disques

Poste l'affichage retourné.
 
Y'a plein de trucs ... et ça fait plus de 5000 caractères. J'envoie en 2 fois.
Bloc de code:
diskutil umountDisk force disk2 ; diskutil ap deleteContainer disk2 ; diskutil eraseVolume free null disk0s3 ; diskutil resizeVolume disk0s2 0b ; diskutil ap create disk1s2 disk0s2 "Macintosh HD" ; diskutil list
Forced unmount of all volumes on disk2 was successful
Started APFS operation on disk2
Deleting APFS Container with all of its APFS Volumes
Unmounting Volumes
Unmounting Volume "Macintosh HD" on disk2s1
Unmounting Volume "Preboot" on disk2s2
Unmounting Volume "Recovery" on disk2s3
Unmounting Volume "VM" on disk2s4
Deleting Volumes
Deleting Container
Wiping former APFS disks
Switching content types
Reformatting former APFS disks
Initialized /dev/rdisk0s3 as a 2 TB case-insensitive HFS Plus volume with a 147456k journal
Mounting disk
1 new disk created or changed due to APFS operation
Disk from APFS operation: disk0s3
Finished APFS operation on disk2
Started erase on disk0s3 Untitled
Unmounting disk
Finished erase on disk0
Resizing to full size (fit to fill)
Started partitioning on disk0s2 Untitled
Verifying the disk
Verifying file system
Volume was successfully unmounted
Performing fsck_hfs -fn -x /dev/rdisk0s2
Checking Journaled HFS Plus volume
Checking extents overflow file
Checking catalog file
Checking multi-linked files
Checking catalog hierarchy
Checking extended attributes file
Checking volume bitmap
Checking volume information
The volume Untitled appears to be OK
File system check exit code is 0
Restoring the original state found as mounted
Resizing
Modifying partition map
Growing file system
Finished partitioning on disk0s2 Untitled
 
C'est un peu le bazar.
Bloc de code:
warning: Overallocation Detected on Main device: (2180545+1) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180563+1) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180604+1) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180624+1) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180643+5) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180654+2) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180657+4) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180662+1) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180668+4) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180680+3) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180695+1) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180697+2) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180703+1) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180720+1) bitmap address (20a385)
warning: Overallocation Detected on Main device: (2180724+1) bitmap address (20a385)
too many warnings generated; suppressing subsequent ones
Performing deferred repairs
The volume /dev/disk1s2 appears to be OK
Storage system check exit code is 0
Growing APFS Physical Store disk0s2 from 2 226 032 525 312 to 3 000 383 225 856 bytes
Modifying partition map
Growing APFS data structures
Finished APFS operation
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                 Apple_APFS Container disk2         3.0 TB     disk0s2

/dev/disk1 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                 Apple_APFS Container disk2         121.1 GB   disk1s2

/dev/disk2 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +3.1 TB     disk2
                                 Physical Stores disk1s2, disk0s2
   1:                APFS Volume Macintosh HD            163.4 GB   disk2s1
   2:                APFS Volume Preboot                 45.3 MB    disk2s2
   3:                APFS Volume Recovery                519.2 MB   disk2s3
   4:                APFS Volume VM                      2.1 GB     disk2s4
 
Il y a quelques problèmes de sur-allocation de blocs lors de la vérification de l'apfs > ce qui n'a pas empêché l'opération de réussir.

Voici tes 2 disques -->
Bloc de code:
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                 Apple_APFS Container disk2         3.0 TB     disk0s2

/dev/disk1 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                 Apple_APFS Container disk2         121.1 GB   disk1s2

  • 2 partitions de type Apple_APFS : 3 To + 121 Go --> qui virtualisent ensemble un espace-disque Conteneur disk2 -->
Bloc de code:
/dev/disk2 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +3.1 TB     disk2
                                 Physical Stores disk1s2, disk0s2
   1:                APFS Volume Macintosh HD            163.4 GB   disk2s1
   2:                APFS Volume Preboot                 45.3 MB    disk2s2
   3:                APFS Volume Recovery                519.2 MB   disk2s3
   4:                APFS Volume VM                      2.1 GB     disk2s4

  • sur lequel il y a les 4 volumes apfs requis.

=> est-ce que tu as encore des demandes ?
 
C'est parfait, merci beaucoup mais j'aimerais maintenant partitionner pour avoir des disques internes de stockage indépendants, et que ces disques apparaissent sur le bureau, ce qui n'est plus le cas. J'ai juste le Macintosh HD.
 
Il est possible à présent (si tu le souhaites) --> de rétrécir le Conteneur apfs > pour créer des partitions de stockage avec leurs volumes sur le seul HDD de 3 To -->

- tu n'as qu'à dire quelles tailles et quels noms de volumes tu souhaiterais...​
 
En fait je n'ai plus que le disque de 3,12 To qui apparait, quand je fais "à propos du mac" et "stockage". C'est normal ?

Un disque "FREDERIQUE" avec 1,5 to
Un autre "PIERRE" avec 500 go
C'est possible ?
 
Dernière édition par un modérateur:
Actuellement > tu as un seul Conteneur apfs de 3,12 To - normal.

Passe la commande :
Bloc de code:
diskutil ap resizeContainer disk2 1.12t jhfs+ FREDERIQUE 1.5t jhfs+ PIERRE 0b ; diskutil list

  • la commande rétrécit le Conteneur apfs à 1,12 To => ce qui dégage 2 T d'espace disponible > avec lesquels sont créés : une partition de 1,5 To et son volume FREDERIQUE au format jhfs+ & une partition de 500 Go (environ) et son volume PIERRE au même format jhfs+. Puis le tableau des disques est réaffiché

Poste l'affichage retourné.
 
Ça fait des tonnes de "warning ....etc" que j'ai enlevé pour envoyer le doc en une fois.


Bloc de code:
diskutil ap resizeContainer disk2 1.12t jhfs+ FREDERIQUE 1.5t jhfs+ PIERRE 0b ; diskutil list
Started APFS operation
Aligning shrink delta to 2 001 506 295 808 bytes and targeting a new physical store size of 998 876 930 048 bytes
Determined the minimum size for the targeted physical store of this APFS Container to be 169 178 415 104 bytes
Resizing APFS Container designated by APFS Container Reference disk2
The specific APFS Physical Store being resized is disk0s2
Verifying storage system
Using live mode
Performing fsck_apfs -n -x -l -S /dev/disk1s2
Checking the container superblock
Checking the fusion superblock
Checking the EFI jumpstart record
Checking the space manager
Checking the space manager free queue trees
Checking the object map
Checking the Fusion data structures
Checking volume
Checking the APFS volume superblock
The volume Macintosh HD was formatted by diskmanagementd (945.241.4) and last modified by apfs_kext (945.241.4)
Checking the object map
Checking the snapshot metadata tree
Checking the snapshot metadata
Checking the extent ref tree
Checking the fsroot tree
Checking volume
Checking the APFS volume superblock
The volume Preboot was formatted by diskmanagementd (945.241.4) and last modified by apfs_kext (945.241.4)
Checking the object map
Checking the snapshot metadata tree
Checking the snapshot metadata
Checking the extent ref tree
Checking the fsroot tree
Checking volume
Checking the APFS volume superblock
The volume Recovery was formatted by diskmanagementd (945.241.4) and last modified by apfs_kext (945.241.4)
Checking the object map
Checking the snapshot metadata tree
Checking the snapshot metadata
Checking the extent ref tree
Checking the fsroot tree
Checking volume
Checking the APFS volume superblock
The volume VM was formatted by apfs.util (945.241.4) and last modified by apfs_kext (945.241.4)
Checking the object map
Checking the snapshot metadata tree
Checking the snapshot metadata
Checking the extent ref tree
Checking the fsroot tree
Verifying allocated space
warning: Overallocation Detected on Main device: (2180277+1) bitmap address (2306c7)
warning: Overallocation Detected on Main device: (2180279+3) bitmap address (2306c7)
warning: Overallocation Detected on Main device: (2180283+4) bitmap address (2306c7)
warning: Overallocation Detected on Main device: (2180289+3) bitmap address (2306c7)
warning: Overallocation Detected on Main device: (2180295+1) bitmap address (2306c7)

warning: Overallocation Detected on Main device: (2180724+1) bitmap address (2306c7)
too many warnings generated; suppressing subsequent ones
Performing deferred repairs
The volume /dev/disk1s2 appears to be OK
Storage system check exit code is 0
Shrinking APFS Physical Store disk0s2 from 3 000 383 225 856 to 998 876 930 048 bytes
Shrinking APFS data structures
Shrinking partition
Modifying partition map
Initialized /dev/rdisk0s4 as a 467 GB case-insensitive HFS Plus volume with a 40960k journal
Mounting disk
Initialized /dev/rdisk0s3 as a 1 TB case-insensitive HFS Plus volume with a 114688k journal
Mounting disk
2 new disks created or changed due to APFS operation
Disk from APFS operation: disk0s3
Disk from APFS operation: disk0s4
Finished APFS operation
/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *3.0 TB     disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                 Apple_APFS Container disk2         998.9 GB   disk0s2
   3:                  Apple_HFS FREDERIQUE              1.5 TB     disk0s3
   4:                  Apple_HFS PIERRE                  501.4 GB   disk0s4

/dev/disk1 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                 Apple_APFS Container disk2         121.1 GB   disk1s2

/dev/disk2 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +1.1 TB     disk2
                                 Physical Stores disk1s2, disk0s2
   1:                APFS Volume Macintosh HD            164.0 GB   disk2s1
   2:                APFS Volume Preboot                 45.3 MB    disk2s2
   3:                APFS Volume Recovery                519.2 MB   disk2s3
   4:                APFS Volume VM                      2.1 GB     disk2s4
 
C'est pas joli, ça ? -->
Bloc de code:
   3:                  Apple_HFS FREDERIQUE              1.5 TB     disk0s3
   4:                  Apple_HFS PIERRE                  501.4 GB   disk0s4

  • et pour ce qui est de ton volume de démarrage Macintosh HD -->
Bloc de code:
/dev/disk2 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      APFS Container Scheme -                      +1.1 TB     disk2
                                 Physical Stores disk1s2, disk0s2
   1:                APFS Volume Macintosh HD            164.0 GB   disk2s1
   2:                APFS Volume Preboot                 45.3 MB    disk2s2
   3:                APFS Volume Recovery                519.2 MB   disk2s3
   4:                APFS Volume VM                      2.1 GB     disk2s4

  • il est porté par un Fusion Drive apfs qui bénéficie de la vitesse du SDD + de l'ajout de 1 To de HDD --> ce qui donne une capacité disponible de 1,1 To.

=> problème résolu - non ?