V'là j'ai installé le firmware 1.0 pour l'imac et comme dis dans un autre post.. mon imac souffle encore plus qu'avant.. C'est l'horreur... du coup j'ai téléchargé le restore firmware mis à disposition le même jour que les autres .. et là mission impossible.. j'ai beau suivre les instructions à la lettre ... y'a un truc qui cloche...
lorsque je pèse sur le bouton "ON" et que je le maintiens enfoncé.. j'ai bien le LED qui s'allume et qui clignote mais des tonnes de fois, sans pouvoir distinguer les 3 rapides, les 3 lents, puis les 3 rapides...
là déjà bizarre... ensuite dès la fin des clignotements je libère le bouton ON et j'insère mon cd...
mais même pas le temps d'insérer le cd qu'un bip très fort se fait entendre .. et mon imac démarre comme à son habitude... donc impossible de lancer le firmware de restauration...
quelqu'un a une idée?
voilà ce qu'il faut faire (et que je n'arrive pas à faire vu que mes LEDS ne clignote pas ainsi... ) :
Alors HELP à tous !!!!!!!
Firmware Restoration CD v 1.0
About this update
About the Firmware Restoration CD
Your rights to use this update are subject to the terms of the software license agreement that follows and accompanies the update. By downloading or using this update, you accept the terms of the software license agreement.
The Firmware Restoration CD is used to restore the firmware of an Intel-based iMac (early 2006), Mac mini (early 2006), or MacBook Pro (early 2006) to original factory condition.
It can only be used to restore the Firmware after an interrupted or failed update.
To restore your computer's firmware, first create a CD using the disk image named "FirmwareRestorationCD.dmg":
1) Launch Disk Utility (located in /Applications/Utilities).
2) Click on the Burn icon or select the "Burn..."menu from the Images menu.
3) Navigate to where FirmwareRestorationCD.dmg is located and click the Burn button.
4) Insert a blank recordable CD or DVD.
5) Click the Burn button to create the Firmware Restoration CD.
The files are burned to the disc.
Using the Firmware Restoration CD, restore your Firmware back to factory condition:
6) Insure that the machine you are trying to restore is plugged into an AC outlet.
7) Power on the computer and hold down the power button until the LED blinks rapidly followed immediately by a successive series of blinks (3 quick blinks, 3 slow blinks, 3 quick blinks), then release the Power button.
8) Insert the Firmware Restoration CD into the optical drive.
After 30-60 seconds, the startup beep sound is played and a progress bar appears beneath the Apple logo on a gray screen.
The progress bar indicates the firmware is being updated.
DO NOT unplug, shut down, or restart the computer during the update or you will need to restart the restoration process beginning with step 6.
9) The computer will restart automatically after the firmware is updated.
This information is also available at the following url: http://www.info.apple.com/kbnum/n303469
Download Firmware at the following site:
http://wsidecar.apple.com/cgi-bin/n...form=osx&method=sa/article.html?artnum=303489
lorsque je pèse sur le bouton "ON" et que je le maintiens enfoncé.. j'ai bien le LED qui s'allume et qui clignote mais des tonnes de fois, sans pouvoir distinguer les 3 rapides, les 3 lents, puis les 3 rapides...
là déjà bizarre... ensuite dès la fin des clignotements je libère le bouton ON et j'insère mon cd...
mais même pas le temps d'insérer le cd qu'un bip très fort se fait entendre .. et mon imac démarre comme à son habitude... donc impossible de lancer le firmware de restauration...
quelqu'un a une idée?
voilà ce qu'il faut faire (et que je n'arrive pas à faire vu que mes LEDS ne clignote pas ainsi... ) :
Alors HELP à tous !!!!!!!
Firmware Restoration CD v 1.0
About this update
About the Firmware Restoration CD
Your rights to use this update are subject to the terms of the software license agreement that follows and accompanies the update. By downloading or using this update, you accept the terms of the software license agreement.
The Firmware Restoration CD is used to restore the firmware of an Intel-based iMac (early 2006), Mac mini (early 2006), or MacBook Pro (early 2006) to original factory condition.
It can only be used to restore the Firmware after an interrupted or failed update.
To restore your computer's firmware, first create a CD using the disk image named "FirmwareRestorationCD.dmg":
1) Launch Disk Utility (located in /Applications/Utilities).
2) Click on the Burn icon or select the "Burn..."menu from the Images menu.
3) Navigate to where FirmwareRestorationCD.dmg is located and click the Burn button.
4) Insert a blank recordable CD or DVD.
5) Click the Burn button to create the Firmware Restoration CD.
The files are burned to the disc.
Using the Firmware Restoration CD, restore your Firmware back to factory condition:
6) Insure that the machine you are trying to restore is plugged into an AC outlet.
7) Power on the computer and hold down the power button until the LED blinks rapidly followed immediately by a successive series of blinks (3 quick blinks, 3 slow blinks, 3 quick blinks), then release the Power button.
8) Insert the Firmware Restoration CD into the optical drive.
After 30-60 seconds, the startup beep sound is played and a progress bar appears beneath the Apple logo on a gray screen.
The progress bar indicates the firmware is being updated.
DO NOT unplug, shut down, or restart the computer during the update or you will need to restart the restoration process beginning with step 6.
9) The computer will restart automatically after the firmware is updated.
This information is also available at the following url: http://www.info.apple.com/kbnum/n303469
Download Firmware at the following site:
http://wsidecar.apple.com/cgi-bin/n...form=osx&method=sa/article.html?artnum=303489
