Installation sur des Mac incompatibles Big Sur

Tout est rentré dans l'ordre. J'avais juste oublié de lancer les scripts en root. :banghead:
:up:
PS : Pour info le script 0.5.4 n'a jamais voulu se dézipper sur mon iMac. J'ai utilisé l'ancien et tout est :up:

Bizarre, je viens d'essayer, pas de problème chez moi:

Bloc de code:
serge@iMac-de-Serge Downloads % ls -la big-sur-micropatcher-dev-v0.5.4.zip
-rw-r--r--@ 1 serge  staff  70420797  6 fév 11:14 big-sur-micropatcher-dev-v0.5.4.zip
serge@iMac-de-Serge Downloads %
serge@iMac-de-Serge Downloads %

Bloc de code:
serge@iMac-de-Serge Downloads %
serge@iMac-de-Serge Downloads %
serge@iMac-de-Serge Downloads % unzip  big-sur-micropatcher-dev-v0.5.4.zip
Archive:  big-sur-micropatcher-dev-v0.5.4.zip
ab3447531265cd8f94643702733d76b8f3723512
   creating: big-sur-micropatcher-dev-v0.5.4/
 extracting: big-sur-micropatcher-dev-v0.5.4/.gitignore 
   creating: big-sur-micropatcher-dev-v0.5.4/Automator/
  inflating: big-sur-micropatcher-dev-v0.5.4/Automator/automator.sh 
  inflating: big-sur-micropatcher-dev-v0.5.4/Automator/postautomator.sh 
  inflating: big-sur-micropatcher-dev-v0.5.4/README.md 
  inflating: big-sur-micropatcher-dev-v0.5.4/config-opencore.sh 
  inflating: big-sur-micropatcher-dev-v0.5.4/install-opencore.sh 
  inflating: big-sur-micropatcher-dev-v0.5.4/install-setvars.sh 
  inflating: big-sur-micropatcher-dev-v0.5.4/micropatcher.sh 
   creating: big-sur-micropatcher-dev-v0.5.4/misc-scripts/
[...]
  inflating: big-sur-micropatcher-dev-v0.5.4/setvars/EFI/boot/setvars.efi 
  inflating: big-sur-micropatcher-dev-v0.5.4/setvars/Makefile 
  inflating: big-sur-micropatcher-dev-v0.5.4/setvars/build-all.sh 
  inflating: big-sur-micropatcher-dev-v0.5.4/setvars/setvars-enablesiparv-vb.c 
  inflating: big-sur-micropatcher-dev-v0.5.4/setvars/setvars-enablesiparv.c 
  inflating: big-sur-micropatcher-dev-v0.5.4/setvars/setvars-verboseboot.c 
  inflating: big-sur-micropatcher-dev-v0.5.4/setvars/setvars.c 
  inflating: big-sur-micropatcher-dev-v0.5.4/unpatch.sh 
serge@iMac-de-Serge Downloads %
 
C'est peut-être moi qui ai fait une boulette... j'en ai (trop) l'habitude.

J'essaierai à l'occasion en téléchargeant un nouvel exemplaire. ;)
 
Dernière édition par un modérateur:
  • J’aime
Réactions: sergiodadi
Point sur les "patchers" pour Big Sur (à jour au 10 décembre 2020)

Comme il y a pas mal d'intérêt pour les patchers, voila une petite synthèse pour les patchers pour Big Sur :

Nouvelle version 0.5.4 du patcher Big Sur Micropatcher de Ausdauersport :
  • Big Sur Micropatcher (Version 0.5.4) iMac 2009-2011 edition
  • ce patcher est spécialisé pour les iMac 2009-2011 si la carte graphique de ces iMac a été changée par une carte graphique compatible "metal"
  • cette version incorpore des éléments d'OpenCore dans le but de permettre des mises à jour OTA fiables (= ne pas se retrouver avec un mac "bricked" :( )
  • " Optionally you can now use a preconfigured opencore setup to enably boot and installation of Big Sur on iMac Late 2009 and Mid 2010 as well as on MacBookPro 6,x systems"
  • "Using the command line option patch-kexts.sh --ns you can enable Night Shift on possibly all machines."

Cette version a été testée avec :
Tested patch-kext.sh with release 11.2 (20D64), release 11.1 (20C59) and OTA upgrade to 11.2 (20D64) using OC 0.6.6 upgraded from Beta 11.2 (20D5042d) on iMac Late 2009 and Mid 2011.

La prochaine version en développement est la dev-v0.5.5

 
Cela ne me semble pas très clair. Sur un iMac late 2013, qu'en est-il des mises à jour ?

Est-on toujours obligé de recommencer entièrement la procédure comme le première fois ?

PS : Et donc de trouver une version compète de Big Sur comme la 11.2.1 qui vient de sortir ?
 
Cela ne me semble pas très clair. Sur un iMac late 2013, qu'en est-il des mises à jour ?

Le patcher " iMac 2009-2011 edition" est un fork du micropatcher original, il est spécialisé pour les iMac 2009 - 2011. Il permet justement des mises à jour OTA pour ces iMacs. Je ne sais pas s'il permet les mises à jour OTA pour d'autres iMacs car ce n'est pas le but de l'auteur de supporter d'autres iMacs.

Est-on toujours obligé de recommencer entièrement la procédure comme le première fois ?

Si un patcher fonctionne avec les mises à jour OTA , non, sinon oui ;)

PS : Et donc de trouver une version compète de Big Sur comme la 11.2.1 qui vient de sortir ?

Certains patchers proposent de les récupérer, sinon il y a plusieurs scripts qui permettent de récupérer les OS sur le site d'Apple (et donc légalement , je pense, si on possède bien sur un Mac supportant la version que l'on veut télécharger) , il y a par exemple:

C'est plus clair ?;)
 
L'actualité des patchers au 11 février 2021 :)


Nouvelle version (béta) v 0.0.5 de Patched Sur de BenSova

Une nouveauté intéressante : un menu de compatibilité permet aux nouveaux utilisateurs de savoir comment Big Sur fonctionnera sur leur Mac.

La liste des macs supportés par Patch Sur est disponible ici .

Release Notes:

New Features
• The App Updater allows you to update the app without downloading the new version from GitHub. Please note that this has been tested about once and that's it, so I'm not 100% sure if it works or not. I didn't get many chances to test it because of the nature of how it works.
• macOS Update Detection allows the app to check for an update to macOS and link the instructions that explain how to update for macOS, which is about as much of the macOS updater as you are going to get for now.
Patcher Compatibility Screen allows new users to find out how well Big Sur will work on their Mac. This is a new thing, and I need your input. It's super easy to contribute, so please head over to this GitHub repo and help out!
• Patched Sur is Now Signed so you don't have to right click on the app to open it. Just double click like every other app unless Apple revokes my certificate.
• Transitions between sections of the pre-install app. Great right?
• Clean Leftovers and Contribute Your Experiences buttons in the settings section. Contribute your experiences ties to the patcher compatibility screen.

New Debugging Additions
• Safe Mode forces you into the patch kexts section which prevents the app from crashing like it sometimes does. While I think I fixed the crashing, better safe than sorry.
• Extensive Logging was added, every single command prints its output to terminal. This is mostly for debugging purposes.
• Debug Mode allows the app to disable some of the system info checks when it starts. You won't need this, I only added it because I needed it to find the reason the app crashes.

Bug Fixes
• The Post-Install App Should No Longer Crash in theory.
• Late 2013 iMacs Can No Longer Patch Kexts because they don't need to and the micropatcher has unnecessary errors for them.
• Darker Colors Are Used for the About This Mac and Settings screen.
• The Password Bug won't happen as often
• I don't make very good commits, so some other things too

How do I update?
Just download Post-Install-App.dmg and replace the old post-install app with the new one on the DMG. From then on, you'll be able to update using the in-app updater.
 
Dernière édition par un modérateur:
  • J’aime
Réactions: kaiy75 et Sly54
Just download Post-Install-App.dmg and replace the old post-install app with the new one on the DMG. From then on, you'll be able to update using the in-app updater.
Pourrais-tu préciser ? Faut-il refaire une installation de Big Sur et si oui avec quel patch ? Auparavant j'ai utilisé à 3 reprises micropatcher (11 > 11.1 > 11.2) Si non, que doit-on faire concrètement ?

Merci d'avance. ;)

PS : Je sais, j'en demande beaucoup mais vois-tu cela doit être lié à l'âge. :shy:
 
Dernière édition par un modérateur:
Pourrais-tu préciser ? Faut-il refaire une installation de Big Sur et si oui avec quel patch ? Auparavant j'ai utilisé à 3 reprises micropatcher (11 > 11.1 > 11.2) Si non, que doit-on faire concrètement ?

- Si c'est pour ton iMac 2013 et si c'est pour passer de 11.2 à 11.2.1 et si tu as l'habitude du micropatcher original, tu peux le réutiliser comme tu l'as déjà fait

- Si c'et pour ton iMac 2013 et si c'est pour passer de 11.2 à 11.2.1 et si tu veux un patcher plus simple à utiliser (= avec un interface graphique), tu peux essayer Patch Sur

- Si c'est pour un iMac 2009 à 2011, il est très conseillé d'utiliser le fork de Ausdauersportler (le micropatcher original a des bugs pour l'iMac 2011)

Pour tous ces patchers, il faut à chaque mise à jour, refaire l"opération. Certains patchers "classiques" commencent à utiliser OpenCore pour éviter d'avoir à repatcher et pour permettre des mises à jour OTA complètes et sans problème. À ma connaissance aucun patcher "classique" n'y arrive complètement à l'heure actuelle.

Il y a d'autres solutions un peu plus compliquées :

1) Il existe le patcher Opencore Legacy Patcher qui utilise uniquement OpenCore et qui permet justement de ne pas patcher les fichiers sur disque. Il est encore en développement et il permet en théorie des mises à jour OTA . Il est assez récent (décembre 2020).

Le but de ce patcher est assez simple, essayez de patcher en mémoire et modifier le moins possible sur le disque. Il permet de maintenir les snapshots APFS, AMFI, SIP, FileVault et d'autres fonctionnalités de sécurité activés sans aucun souci de stabilité ou de sécurité.

Il est conseillé pour:
  • 2012+ MacBooks, iMacs and Mac Minis with native GPUs
  • 2008+ Mac Pros with Metal capable GPUs
Attention, plusieurs utilisateurs sur le forum Macrumors se sont retrouvés avec un Mac "bricked", c'est à dire un Mac inutilisable car le firmware a été remplacé par un firmware d'un Mac différent (une des méthodes d'OpenCore est de faire croire que le Mac est un modèle différent). Dans certains cas, on peut reprogrammer le firmware avec un clip du genre CH 341 :
clip.jpg
si ... on a sauvegardé avant le firmware d'origine, voir l'outil ROMTool de dosdude1 pour cela.

2) Autre solution : faire soi-même une configuration personnalisée d'OpenCore, la doc est ici, certains l'ont fait sur ce forum :up:


PS1: je viens de lire sur le forum macrumors que la mise à jour Big Sur 11.2.1 est une mise à jour complète (full installer), à confirmer ?

PS2: il fait beau, je vais faire une petite marche sur La Promenade Des Anglais :)
 

Fichiers joints

  • IMG_7238.jpeg
    IMG_7238.jpeg
    218,1 KB · Affichages: 157
  • IMG_7228.jpeg
    IMG_7228.jpeg
    121,8 KB · Affichages: 152
  • IMG_7220.jpeg
    IMG_7220.jpeg
    182,4 KB · Affichages: 153
Dernière édition par un modérateur:
Merci de ces éclaircissements.

Le plus sage pour moi, tant qu'un patch ne supportera pas nativement les mises à jour, c'est de continuer comme je l'ai fait jusque ici avec micropatcher. ;)

PS : J'ai la chance d'avoir l'iMac 27" 2019 de ma femme resté avec Catalina pour récupérer rapidement la dernière mouture de Big Sur.
 
Bonsoir

Hier soir je me suis lancé dans l’installation de Big Sur sur mon iMac fin 2012, sur un disque dur externe. J’en suis satisfait, tout fonctionne avec patched sur et post install sur. Je trouve le système très réactif, mais j’ai une question :

La version 11.2.1 est disponible, mon mac ne l’a trouve pas en passant par le système, et pareil avec l’app post install, c’est normal ?
 
Dernière édition par un modérateur:
Bonsoir

Hier soir je me suis lancé dans l’installation de big sur sur mon iMac fin 2012, sur un disque dur externe. J’en suis satisfait, tout fonctionne avec patched sur et post install sur. Je trouve le système très réactif, mais j’ai une question :

La version 11.2.1 est disponible, mon mac ne l’a trouve pas en passant par le système, et pareil avec l’app post install, c’est normal ?
je pense que oui, vu que c'est sur un mac patché. il te faudra attendre de pouvoir télécharger 11.3 ou les mises à jour de la 11.2 seront inclues pour re-télécharger l'installateur et recommencer. Enfin je pense
 
Bonsoir

Hier soir je me suis lancé dans l’installation de big sur sur mon iMac fin 2012, sur un disque dur externe. J’en suis satisfait, tout fonctionne avec patched sur et post install sur. Je trouve le système très réactif, mais j’ai une question :

La version 11.2.1 est disponible, mon mac ne l’a trouve pas en passant par le système, et pareil avec l’app post install, c’est normal ?
Bonjour,

voir ici où il y a quelques explications sur les mises à jour de macs patchés ...
 
L'actualité des patchers au 11 février 2021 :)


Nouvelle version (béta) v 0.0.5 de Patched Sur de BenSova

Une nouveauté intéressante : un menu de compatibilité permet aux nouveaux utilisateurs de savoir comment Big Sur fonctionnera sur leur Mac.

La liste des macs supportés par Patch Sur est disponible ici .

Release Notes:

New Features
• The App Updater allows you to update the app without downloading the new version from GitHub. Please note that this has been tested about once and that's it, so I'm not 100% sure if it works or not. I didn't get many chances to test it because of the nature of how it works.
• macOS Update Detection allows the app to check for an update to macOS and link the instructions that explain how to update for macOS, which is about as much of the macOS updater as you are going to get for now.
Patcher Compatibility Screen allows new users to find out how well Big Sur will work on their Mac. This is a new thing, and I need your input. It's super easy to contribute, so please head over to this GitHub repo and help out!
• Patched Sur is Now Signed so you don't have to right click on the app to open it. Just double click like every other app unless Apple revokes my certificate.
• Transitions between sections of the pre-install app. Great right?
• Clean Leftovers and Contribute Your Experiences buttons in the settings section. Contribute your experiences ties to the patcher compatibility screen.

New Debugging Additions
• Safe Mode forces you into the patch kexts section which prevents the app from crashing like it sometimes does. While I think I fixed the crashing, better safe than sorry.
• Extensive Logging was added, every single command prints its output to terminal. This is mostly for debugging purposes.
• Debug Mode allows the app to disable some of the system info checks when it starts. You won't need this, I only added it because I needed it to find the reason the app crashes.

Bug Fixes
• The Post-Install App Should No Longer Crash in theory.
• Late 2013 iMacs Can No Longer Patch Kexts because they don't need to and the micropatcher has unnecessary errors for them.
• Darker Colors Are Used for the About This Mac and Settings screen.
• The Password Bug won't happen as often
• I don't make very good commits, so some other things too

How do I update?
Just download Post-Install-App.dmg and replace the old post-install app with the new one on the DMG. From then on, you'll be able to update using the in-app updater.
Merci ! Depuis le début je tourne sur ce patch, tout fonctionne encore à merveille ! En sachant que le développeur continue de bosser dessus, notamment pour mettre à jour MacOs directement depuis l'utilitaire, sans tout réinstaller à chaque fois !

Capture d’écran 2021-02-12 à 07.49.18.png
 
  • J’aime
Réactions: sergiodadi
Bonjour,

Sur mes 2 MacBook 2011, j’étais avec Catalina tout allait bien. Je suis passé sur Big Sur avec un patcher car il n’étaient pas compatibles et là j’ai un problème de wifi. Pas moyen de réactiver et il n'a plus d’adresse Mac wifi non plus.
Quelqu’un sait s'il faut entrer quelque chose dans le Terminal pour y remédier ou autre ?

Merci bien à vous
 

Fichiers joints

  • 96E7D855-6083-4BE2-B0C9-7D9F3CBB930A.jpeg
    96E7D855-6083-4BE2-B0C9-7D9F3CBB930A.jpeg
    106,4 KB · Affichages: 156
  • CC339580-6278-4076-B484-96EA8477159F.jpeg
    CC339580-6278-4076-B484-96EA8477159F.jpeg
    89,7 KB · Affichages: 152
Dernière édition par un modérateur:

Il vaut mieux poster dans le thread https://forums.macginstallation-sur-des-mac-incompatibles-big-sur pour des problèmes avec un patcher. Un modérateur pourrait déplacer le post ?

--------------------------------
Note du modérateur de service (ici Aliboron) :

Voilà qui est fait ! ;)

Sur mes 2 MacBook 2011, j’étais avec Catalina tout allait bien.

Un MacBook 2011 n'est pas compatible avec Catalina, tu avais déjà utilisé un patcher ? Lequel ?

Je suis passé sur Big Sur avec un patcher

Il serait intéressant de connaitre le patcher utilisé ? ;)
 
Dernière édition par un modérateur:
L'actualité des patchers au 13 février 2021 :)

Ne pas utiliser la v 0.0.6 (bug important) mais la v 0.0.6a

Voir la documentation complète ici

Nouvelle version (beta) v 0.0.6a de Patched Sur de BenSova
  • Quick fix for the automatic graphics switching bug.

Nouvelle version (beta) v 0.0.6 de Patched Sur de BenSova

There were some bugs with the previous release. Fun fact: No new people could patch with v0.0.5, that's how bad one of the bugs was. However, that should be fixed now. I also tried to fix the Erasing bug, but I don't think it'll work all the time.

New Features​

  • Automatic Graphics Switching can now be enabled from the post-install app's settings.
  • MDS is Now Disabled and Stopped while trying to make an installer USB (this might or might not solve the erasing error)

Bug Fixes​

  • The Patched Sur DMG Not Detected popup should no longer popup unless you actually didn't leave the Patched Sur DMG mounted.
  • Correct Model ID should be in the About This Mac section of the post-install app (instead of MacBookPro9,2 unless that's your model)
 
  • J’aime
Réactions: kaiy75 et timkst
Un MacBook 2011 n'est pas compatible avec Catalina, tu avais déjà utilisé un patcher ? Lequel ?

Il serait intéressant de connaitre le patcher utilisé ? ;)

Merci pour ta réponse rapide c’est un super forum, vous m’avez déjà aidé plusieurs fois.
Problème résolu : j’ai downgradé de Big Sur à Catalina, les bug ont disparu.

Bon week-end à tous
 
Dernière édition par un modérateur: